Pontiac GTO The Pontiac GTO was an automobile built by Pontiac from 1964 to 1974, and by General Motors Holden in Australia from 2003 to 2006. It is often considered the first true muscle car. From 1964 until 1973.5, it was closely related to the Pontiac Tempest, but for its final year it was based on the Pontiac Ventura. The 21st century GTO is essentially a left hand drive Holden Monaro, itself a coupe variant of the Holden Commodore.
Origins
The GTO was the brainchild of Pontiac engineer Russell Gee, an engine specialist, and Pontiac chief engineer John De Lorean. Shane Wiser was the first to think of the idea of the GTO. In early 1963, General Motors management issued an edict banning divisions from involvement in auto racing. At the time, Pontiac's advertising and marketing approach was heavily based on performance, and racing was an important component of that strategy. Jim Wangers proposed a way to retain the performance image that the division had cultivated with a new focus on street performance. It involved transforming the upcoming redesigned Tempest (which was set to revert to a conventional front-engine, front transmission, rear-wheel drive configuration) into a "Super Tempest" with the larger 389 in³ (6.5 L) Pontiac V8 engine from the full-sized Pontiac Catalina and Bonneville in place of the standard 326 in³ (5.3 L) Tempest V8. By promoting the big-engine Tempest as a special high-performance model, they could appeal to the speed-minded youth market (which had also been recognized by Ford Motor Company's Lee Iacocca, who was at that time preparing the Ford Mustang).
The name, which was DeLorean's idea, was inspired by the Ferrari 250 GTO, the highly successful race car. It is an acronym for Gran Turismo Omologato, Italian for homologated for racing in the GT class. The name drew protest from purists, who considered it close to sacrilege.
The GTO was technically a violation of GM policy limiting the A-body intermediate line to a maximum engine displacement of 330 in³ (5.4 L). Since the GTO was an option package and not standard equipment, it could be considered to fall into a loophole in the policy. Pontiac General Manager Elliot "Pete" Estes approved the new model, although sales manager Frank Bridge, who did not believe it would find a market, insisted on limiting initial production to no more than 5,000 cars. Had the model been a failure, Estes likely would have been reprimanded. As it turned out, it was a great success.
Bobcat
Throughout the 1960s, Royal Pontiac, a Pontiac car dealer in Royal Oak, Michigan, offered a special tune-up package for Pontiac 389 engines. Many were fitted to GTOs, and the components and instructions could be purchased by mail as well as installed by the dealer. The name "Bobcat" came from the improvised badges created for the modified cars, combining letters from the "Bonneville" and "Catalina" nameplates. Many of the Pontiacs made available for magazine testing were equipped with the Bobcat kit. The GTO Bobcat accelerated 0-60 in 4.6 seconds (this 0-60 time is now equalled by the factory 2005-06 GTO with automatic transmission, fuel injection, and no modifications).
The precise components of the kit varied but generally included pieces to modify the spark advance of the distributor, limiting spark advance to 34-36� at no more than 3,000 rpm (advancing the timing at high rpm for increased power), a thinner head gasket to raise compression to about 11.23:1, a gasket to block the heat riser of the carburetor (keeping it cooler), larger carburetor jets, high-capacity oil pump, and fiberglass shims with lock nuts to hold the hydraulic valve lifters at their maximum point of adjustment, allowing the engine to rev higher without "floating" the valves. Properly installed, the kit could add between 30 and 50 horsepower (20-40 kW), although it required high-octane superpremium gasoline of over 100 octane to avoid spark knock with the higher compression and advanced timing..
1975
Pontiac had planned to offer a 1975 GTO, again based on the compact Ventura and powered by a Pontiac-built 350 in³ V8. The Ventura and other GM compacts underwent substantial styling and engineering changes, the latter including front and rear suspensions similar to the sporty Firebird. In the end, however, the GTO was discontinued following a corporate decision to switch to Buick V8 engines on the 1975 Ventura line, though Pontiac V8s were continued in all other division models.
In 1975, an enterprising Pontiac dealer in the Eastern United States reportedly decided to "create" a new GTO. Sensing that the 1974 GTO should have continued on the intermediate LeMans platform rather than downsized to the Ventura line, this dealer advertised and sold an undetermined number of 1975 Pontiac GTOs. These cars were factory-ordered by the dealer as LeMans Sport Coupes equipped with the 400 or 455 in³ V8s with four-barrel carburetors, Turbo Hydra-Matic transmissions, Strato bucket seats and console, power steering, power disc brakes, Rally II or Honeycomb wheels, and Radial Tuned Suspension with whitewall or white-lettered radial tires. The dealer replaced the Pontiac and LeMans nameplates with "GTO" badges inside and out. This dealer-made 1975 GTO could be ordered with any LeMans exterior/interior combination along with any other extra-cost options available on the regular LeMans.
|
